Wire & Shield - Lab 01 configs
==============================

Paste each file into the matching device console, from enable mode:

  R1  -> r1.cfg      (IOSv)
  R2  -> r2.cfg      (IOSv)
  SW1 -> sw1.cfg     (IOSvL2)
  SW2 -> sw2.cfg     (IOSvL2)

Then on every device:   end
                        write memory

PC1: ip 10.10.0.10/24 10.10.0.1    then save
PC2: ip 10.20.0.10/24 10.20.0.1    then save

Build sheet with diagram, steps and verification:
https://wireandshield.com/labs/

Topology is cascaded: R2 -> SW1 -> SW2. Both switches must NOT
connect directly to the router, or the VLAN 99 management
address on SW2 is unreachable.
